[Grizz1963]

Well…..

Surprise…!!!!

Not dressed up like this for a while.

Had an invitation on Thursday to go do some training in Woolwich.

So no shorts n flip flops.



By 6.00pm it was back to normal in shorts, though I must say, it was Awesome being out and interacting with real humans. They were happy to see me as well.

Sally brought a load of high density plastic/foam pallet spacers from work.

They are used to separate layers of glass bottles used by one specific customer.

Her company sees scrap for the skip, I see materials to use for all sorts of tasks.



Friday was a busy day for work.

@pauly came over by around 4.30pm to collect some items for Woody, his C10 build and to deliver a plastic Jeep fuel tank and its steel cover for the Rezin Rockit that only needs a “Tophat” to complete it, and also a blasting pot for me to use to media blast the chassis, front and rear suspensions, as it seems a good idea to do that before painting and starting to do the rebuild of the suspension parts etc before getting a motor in here. As always a good visit and this time neither of us were crawling around under a car at 5’C as we usually do when he visits. Though there is still some time to,fix that. S10 needs lowering 😈

And in the evening Sally came over and chatted with Paul before he left in the Super Fiesta to go face evening traffic on the M25 and Dartford Crossing, headed home to Essex.

Sally, clever girl that she has become, had scavenged some stainless steel in the rubbish pile outside work, for me to go sell for her cooker fund

I gave the pieces one look and posted them onto FB Marketplace at £15 each or £25.00 for two, after checking them out online, prices range from £120.00 upward each.

So someone would have a bargain and I did not have to go weigh the stainless in.

A buyer appeared and fetched them from Leigh on Sea in Essex at 06.00 this morning, happy buyer, and cash in the kitty.



Saturday had been booked out to mate @Craigrk to help him get to some of the tasks he needs to get to before moving home to Shropshire.

Got there early, coffee, chats and catch up.

Then onto the first task…….

Try get the Chevy started.



Dismal failure, starter motor suspect.

Then we moved onto task no 2

Get his bargain at £180.00 delivered, DEAD Ride on mower going.



So drained 3..5 liters of petrol from the crank case, and when I pulled the plug, it glugged more petrol out there, then cranked it a few times to push more fuel out the head.

CLICK LINK FOR VIDEO

https://youtu.be/FLl1kHaNdlc

Craig disassembled and cleaned the carb, then reassembled it all.

Jump started from the car as the battery it came with it mullered…….

CLICK LINK FOR VIDEO

https://youtu.be/uMPqihaEJH0

After parking the mower we went in to have an awesome deli style lunch Craigs wife had put out for us.

Followed by a regroup and packing all the mechanical tools away, it was raining intermittently all day.

So we decided to rip a bunch of 4.5 meter long 2x8 inch boards Craig had scored in order for him to make up new trusses for his bike shed that is being widened by 1 meter.

All the lumber was free from a building deconstruction site where he had been fetching a load of wood from, like I did .


CLICK LINK,FOR VIDEO

https://youtu.be/ZSYDOYl3dgk


By 5.00pm we were done with the tasks I could help with so I got in the car and headed home for the 75 minute trip.

During the afternoon I posted the free bike in FB Marketplace as well for £400.00

By this morning it had over 1500 views, and about 40 enquiries.

I suspect it was “too cheap” but if Sally gets some cash and someone a cheap bike, thats nota bad thing.

Amazing how many guys offered more and wanted to collect immediately.



And this one.



I have been gazumped before and once I agreed to selling to a guy, that was locked in, in my world at least.


So waiting for the buyer to come and collect the bike today.

Fingers crossed.