Quote:
Originally Posted by Ziegelsteinfaust
I picked up a C20 front suspension....
Along with pan-caking the crossmember, and doing the make it handle better mods. All of them,
Also has anyone ever sectioned a crossmember say 2.5 to 3 inches, and used rod ends with spacers to correct bump steer in the truck?
|
That's an entire drum of worms
I'm at the point of it isn't worth it, nor can you go 3 inches without major mods 1.5 inches and stock steering is about it til the tie rods run into the u bolts holding the lowers.
Not to mention the wacked geometry of raising the lower pivot but not the upper. Then the bumpsteer is whole nother can of worms.