|
Re: Inline 6 is really tired
I use a Vac gauge on a kneescraper set under my dash.
Idle 700-800 RPM, Oil pressure 40 PSI, 180* water temp at operating temperature, I get 17.5''Hg nominal. 292 L6, .030-Over, Crane 260H cam. GM HEI Distributor.
__________________
Every 25 years I like to rebuild that 292, whether it needs it or not.
Last edited by '68OrangeSunshine; 04-06-2021 at 01:02 AM.
|