View Single Post
Old 04-17-2021, 10:35 PM   #53
ItWillBeSlow
Registered User
 
ItWillBeSlow's Avatar
 
Join Date: May 2013
Location: You're the only 10 I see
Posts: 286
Re: Roof patch causing warp / oil canning

Quote:
Originally Posted by nsb29 View Post
I have used panel bond several times in positions where if I could have gotten in there to clamp it I couldíve welded it, I used panel bond when I put the big back window in my 65 by making sure that the two panels lined up properly and touching each other All the way across I installed the inner cab Using the panel bond and clamped the cab around the door opening and window The panel bond that squeezed out of the joint was wiped off leaving a perfect seem and then spot welded the rest.
Just for kicks I have taken some of the leftover panel bond and pressed couple pieces of scrap together itís stronger than a weld you canít rip it apart
Thanks for the info!
__________________
1972 C20
ItWillBeSlow is offline   Reply With Quote