The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

vtblazer · 05-20-2008, 08:29 PM

Pics of the rest of the sheet metal I picked up from you:

*White passengers door is not good either, you can see the bow it has and those holes in the bottom of the door are there because someone once pushed out a dent in the lower portion.
That area of the door is full of bondo too.
Lastly, that inner corner showing rust will for the most part disappear when sand blasted, I'd bet.

*Of the tailgates, only the Ochra one will be worth trying to use.

05-20-2008, 08:29 PM	#141
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Re: Project: Bolt one on Pics of the rest of the sheet metal I picked up from you: White passengers door is not good either, you can see the bow it has and those holes in the bottom of the door are there because someone once pushed out a dent in the lower portion. That area of the door is full of bondo too. Lastly, that inner corner showing rust will for the most part disappear when sand blasted, I'd bet. Of the tailgates, only the Ochra one will be worth trying to use. Attached Images Last edited by vtblazer; 05-20-2008 at 08:40 PM.