The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

47 Fasttoys · 11-09-2017, 07:43 AM

9-18-2013
Thank's for the link. Started working on the passenger door. Most of the parts are in good shape except the window crank gears. I ordered new rollers, crank handles, a gear set, arm rests, panel/SS trim, outside handles, seals, tinted glass, glass seals, wipers. Door bottoms are solid with only minor surface rust. Both doors have the lower hinge area pushed in, it looks like at one time they used a block of wood to attempt to adjust the door alignment. I as able to fix this for the most part. Not perfect by any means but it will do.

11-09-2017, 07:43 AM	#13
47 Fasttoys Registered User Join Date: Sep 2013 Location: Westminster, SC Posts: 933	Re: '47 Loadmaster COE (rebuild pictures) 9-18-2013 Thank's for the link. Started working on the passenger door. Most of the parts are in good shape except the window crank gears. I ordered new rollers, crank handles, a gear set, arm rests, panel/SS trim, outside handles, seals, tinted glass, glass seals, wipers. Door bottoms are solid with only minor surface rust. Both doors have the lower hinge area pushed in, it looks like at one time they used a block of wood to attempt to adjust the door alignment. I as able to fix this for the most part. Not perfect by any means but it will do. Attached Images __________________ My '47 C.O.E build Last edited by 47 Fasttoys; 11-09-2017 at 02:18 PM.