The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Pontiac1976 · 11-26-2022, 11:31 AM

First the question quote was on the seat, so I just keep place. Two site like the factory for feeding the belt throw. if you wanted copy factory set. and because 81-87 there two different styles I not sure I would because I do not have many people in cab for the one center belt the twist is nice that person try buckle up. Third the sewing is for the belt to the sleeves of the LMC like the factory did to hold it.
Now I believe the LMC bucket seat sleeves may be longer may have to have the bottom cut you can't see any how.
In your second pic is what the LMC sleeves most like which it the later style.
So, you have order them I have had a chance yet. very Kool I would like you thoughts on them, I still going to order them.

Oh, for the center you still have to make a straight cut if you want it like the factory did to lay out face to right way if you have more than two people.

11-26-2022, 11:31 AM	#747
Pontiac1976 Registered User Join Date: Oct 2015 Location: Ottawa, Ontario, Canada Posts: 750	Re: Bench Seats, Having them Reupholstered First the question quote was on the seat, so I just keep place. Two site like the factory for feeding the belt throw. if you wanted copy factory set. and because 81-87 there two different styles I not sure I would because I do not have many people in cab for the one center belt the twist is nice that person try buckle up. Third the sewing is for the belt to the sleeves of the LMC like the factory did to hold it. Now I believe the LMC bucket seat sleeves may be longer may have to have the bottom cut you can't see any how. In your second pic is what the LMC sleeves most like which it the later style. So, you have order them I have had a chance yet. very Kool I would like you thoughts on them, I still going to order them. Oh, for the center you still have to make a straight cut if you want it like the factory did to lay out face to right way if you have more than two people. __________________ 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change. Last edited by Pontiac1976; 11-26-2022 at 11:38 AM.