Re: Camaro Caliper Brackets
Quote:
Originally Posted by Nova_Cobra64
Ok, I swapped the calipers from side to side, bleeder up, parking brake lever facing down. Made brackets and mounted the cables then mocked up the intermediate cable. I think ideally it would be best to find a shorter cable with the same type of ends. There is probably 10-12" of slack in the position I have them in, if the calipers were mounted in the forward position you could probably go 16" shorter. The camaro cables will work, but going shorter would allow for a cleaner install. Pics have been added to my flickr (link in earlier post).
|
You cables will have a better chance because you fabbed up a different cable mount to the trailing arm, did you mount the cable mount in the factory location? But you are correct that the camaro cables have alot of slack as a whole unit....
Smitty
|