The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Richard** · 02-16-2021, 02:06 AM

Took the rear crossmember out and shackle hangers off to plate the mounting point and solidify the 3" frame extension. Back together now and I modified the inner bumper brackets to work. Outers will have to wait until new springs are installed. I finally located the new fuel pump and it arrived. Have pretty much everything for the tank. Think I will need to replace the old sending unit as the readings are not stable from it.
Will start removing stock rear suspension on Wednesday. The joy of removing frame rivets, not really.

02-16-2021, 02:06 AM	#113
Richard Senior Member Join Date: Dec 1999 Location: Southern California Posts: 2,712	Re: Restomod 72 K10 "Good Memories" Took the rear crossmember out and shackle hangers off to plate the mounting point and solidify the 3" frame extension. Back together now and I modified the inner bumper brackets to work. Outers will have to wait until new springs are installed. I finally located the new fuel pump and it arrived. Have pretty much everything for the tank. Think I will need to replace the old sending unit as the readings are not stable from it. Will start removing stock rear suspension on Wednesday. The joy of removing frame rivets, not really. Attached Images __________________ Richard 1972 K10 Custom Deluxe SWB Fleetside My build https://67-72chevytrucks.com/vboard/...d.php?t=800746 Last edited by Richard; 02-16-2021 at 02:17 AM.