Re: 70 gmc DIY build
Picked up a front end to rebuild and have accumulated most of the parts I'll need. For the front cpp drop spindles and 6 lug rotors. UMI 2" drop springs. Moog everything to rebuild the front end PST polygraphite control arm bushings. Delco master and brake hoses, front end has all the brake lines and proportioning valve on it so I'm planning on using them. Also bought a Redhead quick ratio steering box. For the back I bought new perches spring plates and Ubolts from Roughstuff specialties. I already have 1 to 2" drop shackles in the rear I can leave them or go back to the stock shackles depending on what flipping the axle gives me.
__________________
70 GMC custom short bed conversion
69 GMC panel truck
|