|
Re: Skidmore '67 C20
It has been a while!
I have been making forward progress the last couple months and I will be doing some rapid-fire catch up posts here.
Picking up from welding the trailing arms... I started to prep the frame and cab underside for paint.
Before I could prep the underside of the cab I needed to scrape about an inch of undercoating and oil off the bottom, and then patch up all of the previous owner's handywork in making Swiss cheese of the cab floor for bolting in harnesses. I also removed the fuel tank mounts that were spot welded into the back of the cab. There were 12 spot welds per side, and I only managed to punch through the back of the cab twice! More welding...
I also finished butt welding up the outer rocker. I chose to do a small customization and remove the flange.
|