|
Re: Door panel dying
As said you can dye, but with dark colors you may have touse more spray coats get to light color show right. Key is to clean panel mean time use extra time on the most touched places and any place that hold dirt or spills and the edges. Use a directed. Start light coat on edges any places have more wear as your first hazing let flash. Then do the panel thin coats as directed until you get coverage it you make to many coat after you will start to lose you texture of the parts. good luck take your time. (it can never be to clean.)
__________________
 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed
Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.
|