The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Rich72C10** · 05-01-2021, 04:20 PM

yep, hood closed and in the garage - figured that would be worst case. Though it was a nice ~70 degs outside and misting, so not even close to Texas summer hot.

I suppose it should help more when the engine is actually running and on the move... Now if O'Riley's would get that open whole spacer in I can get it installed and tested.

Heck, I even found that I can open up this Electric Choke and change out the linkage rod. I'll design the linkage with a bit of coat hanger, then find something a bit thicker in diameter. Where, not sure but I'll be on the lookout for something stiffer and will take push nuts.

05-01-2021, 04:20 PM	#100
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,644	Re: Hard Starting Hot yep, hood closed and in the garage - figured that would be worst case. Though it was a nice ~70 degs outside and misting, so not even close to Texas summer hot. I suppose it should help more when the engine is actually running and on the move... Now if O'Riley's would get that open whole spacer in I can get it installed and tested. Heck, I even found that I can open up this Electric Choke and change out the linkage rod. I'll design the linkage with a bit of coat hanger, then find something a bit thicker in diameter. Where, not sure but I'll be on the lookout for something stiffer and will take push nuts. __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim