[clegg]

Originally Posted by BIGglaSS

I did C4 in the back. In my opinion, the flatout kit gives the back the stinkbug stance. You can probably modify the mounting height to get the stance you want. Or, if you use the transverse spring, longer bolts will get it lower, though geometry may not be optimum. I made my own back-half frame, and tucked the rear end up higher than the flatout mounts.




C6 wheels w/2" adapters: 19x10, 285/35r19

Nice job on the back half and I see you can use the sway bar.

OP, I have a home brew C4 suspension front and back (not flat out), used 275/35/18 and 325/30/19 C6 Grand sport wheels. I had to use 1/2" spacers on the back, concentric style. 1955.2 truck.

I would attach pics but the truck is in body and paint a bit of a distance from me.