The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**omodified** · 07-31-2021, 09:40 PM

Installed the lower control arms tonight. I already had the nickel hardware standing by. I had to sand the paint on the locator pin as it's a tight fit to the cross shaft. I put some pressure lube over the pin and installed the u-bolts. I used nickel anti-seize and torqued everything to spec.

LCA to crossmember - 45 lb/ft
bumpstop - 19 lb/ft
grease fitting zerk - 19 lb/in

07-31-2021, 09:40 PM	#150
omodified Senior Member Join Date: Jul 2010 Location: Race City U.S.A. Posts: 1,005	Re: "Midnight Rider" 1970 C10 SWB Fleetside Installed the lower control arms tonight. I already had the nickel hardware standing by. I had to sand the paint on the locator pin as it's a tight fit to the cross shaft. I put some pressure lube over the pin and installed the u-bolts. I used nickel anti-seize and torqued everything to spec. LCA to crossmember - 45 lb/ft bumpstop - 19 lb/ft grease fitting zerk - 19 lb/in __________________ Board Member #87725 My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=813848 Last edited by omodified; 08-01-2021 at 10:57 AM.