Re: Front suspension and steering questions
Quote:
Originally Posted by Asshat
The distance from the frame to the top of the axle is 1/4” less on the driver side. Not sure if this would make a difference of 1-1/2” when sitting on the ground.
I wonder if the pan hard bar could affect this?
|
Put something under the tires if you need the room (I use pieces of 10x10x2 wood stacked as necessary) & have full weight for your measuring. It shouldn't but can make a difference.
1/4" is not going to translate into 1.5" on the opposite end. That dimension is within 'standards' of a vehicle corner height.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|