|
Re: Tie rod questions
If memory serves right you were looking to keep pretty close to stock ride height and not lower the truck any if at all.
I've never seen a set of Scott's instructions but have to believe just as with MII instructions there has to be an exact verticle distance that the lines between the upper A arm mounting points are and the lower A arm mounting point. Meaning that he would have to have measured a G body or S-10 to get those measurements. Maybe someone has an S-10 frame sitting there that they can measure that distance on to tell you what it is and you can see if your spacing is right or off a bit.
__________________
Founding member of the too many projects, too little time and money club.
My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
|