|
Re: Question about 350 HEI and Mystery tubing
The coil cover cap red one is aftermarket does it have the three bolting screws 1 back 2 each side to hold it in place like factory if not then that cap is only held on by the top clip that attaches to the top of a set of spark plug wire boot on the coil side. since he changed wire to universals coil side set that way the zip tie. You can get both parts at any scrap yard off any small block V8 Chevy with a factory 75-86
__________________
 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed
Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.
|