The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Jaredm82 · 03-26-2007, 05:33 PM

Here are f ew pictures of my steering set up. Worked great for a few thousand miles already accept for the steering shaft. It used to have a rag joint but I have since replaced it with a second u joint. My crossmember is sectioned 1.75" and my steering is raised 1.75" as well. I also lowered my cab mounts 1". The tilt column is out of an early 70's gm van and I raised it up as much as I could by cutting into the firewall. Everything works well and there are no signs of cracking...

03-26-2007, 05:33 PM	#83
Jaredm82 Active Member Join Date: Jul 2005 Location: Ca Posts: 211	Re: progress pics Here are f ew pictures of my steering set up. Worked great for a few thousand miles already accept for the steering shaft. It used to have a rag joint but I have since replaced it with a second u joint. My crossmember is sectioned 1.75" and my steering is raised 1.75" as well. I also lowered my cab mounts 1". The tilt column is out of an early 70's gm van and I raised it up as much as I could by cutting into the firewall. Everything works well and there are no signs of cracking...