The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**68 C10 Driver** · 08-22-2021, 12:15 PM

The last photo above is showing that you also need to drill out the two spot welds outside to the left of the 'seam'...right of the seams on the driver's side.

08-22-2021, 12:15 PM	#117
68 C10 Driver Senior Member Join Date: Oct 2020 Location: Kathleen, GA Posts: 619	Re: 1968 C10 Stepside Restoration Project The last photo above is showing that you also need to drill out the two spot welds outside to the left of the 'seam'...right of the seams on the driver's side.