[mal68ibu]

Alright so here are the pics I could not get loaded up last night. The front clip is going back together fairly easily. I had to clearance the hood release handle, and I'm not sure that will will as it is. I also had to clearance the lower part that bolts to the bottom of the grill to go around the intercooler lower mounts that are welded to the core. The intercooler fits just about perfectly behind the grill. I have to rotate the clamps for the pipes as they rest right on the grill. That duramax fan pulls a crazy amount of air at idle, and it sounds good. The last pic is of the switches to swap from diesel to veggie oil, and my glow plug switch. Those still need to be rewired. The brakes are all plumbed. I have a bracket to hold the residual pressure valves and one to hold the adjustable prop valve for the rear brakes.