The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 01-22-2010, 08:58 AM

Anybody live near Boiling Springs or Shelby NC?

If you do there is going to be some of us going to Shady Side Dragway on the 31 to run.
1:00 PM til 5:00 PM
$7.00 get's you on the track so if you want to see what the old 1/2,3/4,1 ton, whatever will do come on out. It's open to anything so I will have the Golf carts with me to test them before I go to Albany Ga for the opening race of the 2010 season!

01-22-2010, 08:58 AM	#1
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Dragracing Anybody live near Boiling Springs or Shelby NC? If you do there is going to be some of us going to Shady Side Dragway on the 31 to run. 1:00 PM til 5:00 PM $7.00 get's you on the track so if you want to see what the old 1/2,3/4,1 ton, whatever will do come on out. It's open to anything so I will have the Golf carts with me to test them before I go to Albany Ga for the opening race of the 2010 season! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.