The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

geezer#99 · 08-02-2022, 11:06 PM

Is the yoke installed deep enough?
Same motor with the t350 as it is now with the 700?

Also, is the output shaft on the trans at the centreline between the frame rails or offset towards the passenger side rail?

08-02-2022, 11:06 PM	#4
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,516	Re: Dana 60 Problems Is the yoke installed deep enough? Same motor with the t350 as it is now with the 700? Also, is the output shaft on the trans at the centreline between the frame rails or offset towards the passenger side rail? Last edited by geezer#99; 08-03-2022 at 12:29 AM.