i ended up at work for about 12 hours saturday and 7-8 today so i didnt get nearly the progress i had hoped for. but i do have a little to show for my weekend
i started tacked up the rear section of frame rail that i am replacing due to some ugly rust pitting that i dont like.
i made some provisions for a bumper and receiver hitch mount
the holes were drilled out to .75" and sleeved with .75"x.120" wall DOM. i countersunk the holes and welded in the groove and sanded it all flat
this is sitting on the frame that it will replace. i had intended to have this all welded up and the new shackle hangers in place this weekend. i didnt have the time to cut and tack up the hangers but they are ready for cutting on the table when i get around to it
ryan