[MDPotter]

I got my cab back from the sandblaster and 4 coats of epoxy on the underside. I also built an attachment for my engine stand (idea from builtbykane's build thread) so I can wheel my doors around and make it easier to paint them. I put a first coat of filler around the door edges to take care of the dings that come from hammering on the skin.

I also rebuilt my door hings. I got a kit from SOKY (by Woodall) which is a 55-91 kit and it was an easy job and could be done without a press as long as they aren't very rusty. The pins have to be cut to length and the bushings are sintered metal. I was surprised to see that the old bushings I pulled out were plastic, not sure if they were factory or not. My hinges don't feel any tighter, but they do pivot more freely now.