Wiring done
There is very little room to cram modern amenities behind the dash of these trucks. I call this bracket the sooper dookie. It is the basis of stuffing 10lbs of caca into a 1 lb satchel. It mounts to the bottom lip of the dash, and the wiper motor bracket. It holds the radio, a/c ecu, alarm module, and a home made ground block. And the a/c duct hoses hang from it. The alarm is used for the power locks.
The restomod air VapirII ready to be stuffed up behind the dash.
Finished. The left kick panel is home for the OBDII port. I ran the heater hoses and heater control valve through the right kick panel.
The stereo amp will be under the seat, controlled by a bluetooth DSP (digital signal processor).