Re: 2wd swap
Quote:
Originally Posted by KQQL IT
Tentatively using the stock spring hanger as the lower link pivot.
And boxing the inside of the frame at the hanger for upper link off the diff housing.
|
Using the OE hangers is how I'd do it as well. Sounds like a solid plan.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|