Re: 1958 SWB C4 Fleetside - NZ Build
@blown58
I can't find the invoice with the part number sorry. I do remember they are "Speed Engineering" - 1 7/8" to 3" stainless long tube headers, pretty sure they were the camaro ones
As for today... I started by blowing fuses so ripped into the dash wiring as it was gauge circuit. Couldn't find anything wrong , put in a new fuse and it works. Guess I'll wait till it happens again to test some more.
Also installed the newly made remote brake fluid resevoir. I asked the engineer to put a small divider in it so that if one circuit was leaking I could easily isolate which circuit.
I also started testing the prnd321 on the 96 cutlas colum vs the 4l60e trans as I was only able to select down to second. Made some changes to the connector that holds it to the trans, aligned the rod better and it looks like that's fixed and I now have full swing / gear selection..
Last edited by Rickysnickers; 03-19-2021 at 10:08 AM.
Reason: rotateded pics
|