The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

d4hartley · 02-27-2020, 02:12 AM

After I bought it I did the usual tuneup and oil change and cleaning. Figured I couldn't leave it stock long so I ordered 5 inch drop springs for the rear and 3 inch drop springs for the front. After installing front springs I rode on the bump stops for a couple weeks until I finally ordered drop spindles so the geometry would work better. Ended up rebuilding the whole front end excluding steering box while I was under there. Drives straight finally!

02-27-2020, 02:12 AM	#2
d4hartley Registered User Join Date: May 2019 Location: Middle Georgia Posts: 76	Re: 1972 Sierra Grande After I bought it I did the usual tuneup and oil change and cleaning. Figured I couldn't leave it stock long so I ordered 5 inch drop springs for the rear and 3 inch drop springs for the front. After installing front springs I rode on the bump stops for a couple weeks until I finally ordered drop spindles so the geometry would work better. Ended up rebuilding the whole front end excluding steering box while I was under there. Drives straight finally! __________________ 1972 GMC Sierra Grande 1972 GMC Jimmy 1949 Chevy Suburban Last edited by d4hartley; 02-27-2020 at 02:38 AM.