[CSHADES]

worked o\n the drivers door on sat. the front half that i used the bottom was kind of rotten so i decided to make a new piece for that and install it. i didnt want to lose my sense of where the bottom was supposed to be so i did that first then i made a new piece the length of the door where the outside panel overlaps. so i bent it and then used the shrinker to get the curve. i made a new panel about 2 inches up the outside of the door and shrunk the edges of that to get the curve. when i downloaded the pics this morning i see that i didnt get any of the completed door so i will take some and get those on here.