[Justin71105]

I have tightened everything up front I can find. Going to rotate the springs this weekend to sit perfectly in cup. Also pull brake rotors and check clearance with backplate.

It sounds like something heavy duty binding or rubbing and bumping over each other.

Only makes the sound when moving and do not have to turn wheel very much at all. I see the dust plates are touching the lower control arm so will trim those as well.

As far as steering nothing rubs or is loose that I can find. No noise going in a straight line. Have a buddy who is going to look under it while I am backing up and see if he can help isolate it to a component.

I am hoping its just the springs moving in cups, thats a pretty easy fix. Theirs not much else to go over I could think it would be. If its not the steering. Makes no noise at all when sitting on ground and turn wheel or on stands. Springs is the next most logical thing to look at and they are an inch or two from spun in the bottome cups perfectly.