The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

jimbosprint · 05-18-2020, 06:02 PM

I got the driver side back together. I had a little trouble with getting the bearing adjusted, but I think I have it right. The locking hub works good now.

The new pads rub a little on the new rotors. I am sure the caliper was opened all the way up. I hope the problem solves itself with a little use.

Name: 20200518_112340.jpg
Views: 695
Size: 66.3 KB

Name: 20200518_112340.jpg
Views: 695
Size: 66.3 KB

Name: 20200518_113630.jpg
Views: 686
Size: 42.6 KB

Name: 20200518_113637.jpg
Views: 704
Size: 40.7 KB

Name: 20200518_114725.jpg
Views: 689
Size: 38.8 KB

Name: 20200518_125158.jpg
Views: 691
Size: 41.2 KB

05-18-2020, 06:02 PM	#144
jimbosprint Registered User Join Date: Jul 2014 Location: Chico, California Posts: 940	Re: '72 Cheyenne K10 I got the driver side back together. I had a little trouble with getting the bearing adjusted, but I think I have it right. The locking hub works good now. The new pads rub a little on the new rotors. I am sure the caliper was opened all the way up. I hope the problem solves itself with a little use. __________________ '72 Chevrolet C20 Deluxe \| '72 Chevrolet K10 Cheyenne www.jimbosprint.com