I am answering your questions to the best of my ability. I am really looking for power numbers more than drag. If I need more just let me know. Thanks in advance.
Engine info
Bore-4.030
Stroke-3.75
Factory tolerances or set up more as a race motor? not factory
Electric Water pump? mech wp
Electric Fan? yes
Head data:
RHS Pro Torker64cc comb. 170cc intake runner 2.02 Intake and 1.60 Exhaust Valve size
Head flow numbers:
.100-77/74
.200-155/140
.300-220/168
.400-263/172
.500-270/174
Compression ratio: 9.5:1
Type of intake Eldebrock Performer RPM Air Gap
670 cfm Holley Truck avenger
Header Data:
1-1/2 Tube Diameter
28" Tube length to collector (this can be your best guess, but the more accurate, the better)
Cam info:
http://compcams.com/Cam_Specs/CamDet...x?csid=97&sb=1
Duration at .050"-.226/.234
.480I/.498E w/1.5 ratio
Intake centerline-107
LSA-111
What rocker are you using?Summit Roller Rockers 1.5 ratio
Vehicle Data (I am going to try to keep this simple and use my aero for the most part).
Total weight-completly stock
Front/Rear weight bias ????
What trans you are running Stock 4x4 700r4
Size converter 2000-2200 stall converter
Gear ratio-3.73
Differential Detroit Locker
Tire size 31-10.5-15 bfg all terrain