Quote:
Originally Posted by Dieselwrencher
I will take a greaseable pivot bolt, and the lower left shift knob with the white around the black letters.
Do you happen to have any 71 or 72 4 Speed 4x4 shift handles?
|
I'll mark you down for the pivot bolt, but will let you decide on the knob:
The threads are 3/8-24 (fine) instead of the more common (1973+) 7/16-20 (fine).
I don't remember if I removed it from a GM truck or if it was from a Dodge, International or Furd, but it could have been any of them.
UPDATE: it appears this style was used on Furd (NP205 & Dana 24) from 1959-77.
The knob has been repainted at some point (the white looks more cream color) and done rather poorly in my opinion. The knob has a fair bit of wear on it as well, and a small chunk removed on the bottom where it threads to the shifter.
If you're still interested I'd take $10 for it, and it would ship at no additional cost with the bolt.
I found the one shifter I have for a 4-speed, but I believe I removed it from a 1973+ 4x4 (larger dia then the earlier ones?). I could be wrong (I haven't messed with this stuff in years) so if there's a quick way to ID I'll do my best to confirm.