|
Re: Arrrggh! *%&#&@! Wiper Arms!
they look exactly the same as the repro ones I get from bowtie bits. they do go on, but i think you need to need to understand how exact a splined fit is, you need to be in perfect alignment (while holding the arm in the "up" position no less) for the arm to slide down the splines. if you are even the tiniest bit misaligned, talking about being square to the post with the hole, it will not slide on.
and if that isnt enough, wait till you see that you got the drivers arm slightly higher than the passenger arm and you have to take it BACK off and turn it slightly and do it again. haha good times.
|