|
Re: project 39
been working on the glass patterns for the side windows. i figured i had better make sure that the regulators and the glass channels were going to work correctly at the same time. it was a good thing i did. after chopping the top the angle that the window goes up changed, so i had to cut the front window channel mounts and move the bottom 1/2 inch to get the window to roll up and down without binding. so now i have all of my patterns done i can send them off to get some glass made. i also found some nors channels on ebay which definetly helped things along. most of these original channels are so crusty it is hard to find a decent pair.
|