The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Mattchu60 · 03-17-2016, 08:43 AM

I just did this 2 days ago, with a different brand of speaker. I mounted the speaker ring normally, but mounted the speaker to the underside of the bracket and spaced it out with washers.

You may have an issue with your passenger side contacting the A/C vent ducting (if you have A/C) with the speaker set that low. I had to do a lot of in/out with my dash to get it just right height.

03-17-2016, 08:43 AM	#8
Mattchu60 Registered User Join Date: Jan 2014 Location: Swaledale, IA Posts: 485	Re: Infinity 3.5" speaker issue I just did this 2 days ago, with a different brand of speaker. I mounted the speaker ring normally, but mounted the speaker to the underside of the bracket and spaced it out with washers. You may have an issue with your passenger side contacting the A/C vent ducting (if you have A/C) with the speaker set that low. I had to do a lot of in/out with my dash to get it just right height.