The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**kwmech** · 11-24-2021, 10:36 PM

Put the 019 shim in and set the BL to 8 or 9. the picture you showed with the 19 and the bl at 6 isn't too bad. Open the BL a little and we'll see what it looks like. Is the nose cone assy already set up with the proper preload on the bearings? Do you have a really good flat file?

11-24-2021, 10:36 PM	#17
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,391	Re: Gear setup Put the 019 shim in and set the BL to 8 or 9. the picture you showed with the 19 and the bl at 6 isn't too bad. Open the BL a little and we'll see what it looks like. Is the nose cone assy already set up with the proper preload on the bearings? Do you have a really good flat file?