[hugger6933]

The top of the rocker[outer] is what the rubber hooks on to . It forms a "halfpinch weld" for the rubber to slip on. Just brace up the floor to roof before you start taking all that stuff loose. I started unbolting the screws in the rear portion of the inner rocker to B- pillar and heard a big groan and saw the back of the cab drop down. I raised it back where it was and then tightened the bolts back then braced it up and didn't have the problem again. I just took a small piece of square tube and fit it to the floor and the upper pinch weld of the back glass and then welded it in with a couple tacks that can be cut out easily.