The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 67-72 Gauge Panel Removal

krue · 07-15-2005, 08:15 PM

9. Finally, remove the screws holding the panel in place. Lean the top of the panel toward you, remove turn signal bulbs (if not already done) and pull the optic fiber loose if you have auto column (it's on the inner side of the back of the speedo). Finish pulling the panel out.

10. Installation is the reverse of removal.

07-15-2005, 08:15 PM	#5
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	9. Finally, remove the screws holding the panel in place. Lean the top of the panel toward you, remove turn signal bulbs (if not already done) and pull the optic fiber loose if you have auto column (it's on the inner side of the back of the speedo). Finish pulling the panel out. 10. Installation is the reverse of removal. Attached Images __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"