The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 55.2-59 transmission linkage

57tailgater · 08-04-2022, 10:59 AM

Good observation by mr48chev. Note the orientation of the rod on the clutch lever arm. It goes in from the frame rail side, not the center of the truck like shown in the manual. This will make it at an angle and would want to pull the rod off the clutch side rod. If done as intended, both will be parallel.

08-04-2022, 10:59 AM	#10
57tailgater Registered User Join Date: Nov 2011 Location: Middle Georgia Posts: 289	Re: transmission linkage Good observation by mr48chev. Note the orientation of the rod on the clutch lever arm. It goes in from the frame rail side, not the center of the truck like shown in the manual. This will make it at an angle and would want to pull the rod off the clutch side rod. If done as intended, both will be parallel.