Re: 72 c10 prerunner ideas...
Here is some old school tech on a 2wd Blazer. Plated lower control arm, tie bar between lower control arm pivots front and rear, to keep crossmember from bending. The skid plate is bolted to the front tie bar and a bracket off the front of the frame. Rear springs are military wrap second leaf and boxed shackle. The rear axle was a 9" Ford trussed with disc brakes but he sold it and had a GM 10 bolt in it at the time the pics were taken. It was getting a 14 bolt semi-float prepared for it when the pics were taken.
Last edited by justcuz; 02-27-2010 at 08:02 PM.
|