The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Z-Bar Alighnment

**Captainfab** · 04-29-2021, 10:14 PM

Is your small block installed in the correct factory rear location? In the '63-'66 trucks the 230/250 I6 and all small blocks mount in the rear location. There is no difference between the I6 and small block engine mounts or frame brackets. They are not like the '67-'72's. Additionally the ballstud threads into the forward location on the block. The tube of the bellcrank for the '63-'66's does have a slight bend in it..

04-29-2021, 10:14 PM	#4
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Z-Bar Alighnment Is your small block installed in the correct factory rear location? In the '63-'66 trucks the 230/250 I6 and all small blocks mount in the rear location. There is no difference between the I6 and small block engine mounts or frame brackets. They are not like the '67-'72's. Additionally the ballstud threads into the forward location on the block. The tube of the bellcrank for the '63-'66's does have a slight bend in it.. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE