The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Another way to skin the cat; the High Torque 292 LS swap

**dayj1** · 07-17-2015, 12:15 AM

I bought a universal 14" x 24" parallel flow condenser on eBay. I made a three bracket mounting system as well as a bracket for the receiver/drier:

I called Vintage Air and ordered the 3 hard lines that are used in their condenser kits to mount the receiver drier and run through the core support and under the battery. Here it is mounted.:

I made this simple bracket:

To hold the end of the hard lines under the battery box:

07-17-2015, 12:15 AM	#90
dayj1 Senior Member Join Date: Jul 2009 Location: Athens, AL Posts: 499	Operation: Snowballs I bought a universal 14" x 24" parallel flow condenser on eBay. I made a three bracket mounting system as well as a bracket for the receiver/drier: I called Vintage Air and ordered the 3 hard lines that are used in their condenser kits to mount the receiver drier and run through the core support and under the battery. Here it is mounted.: I made this simple bracket: To hold the end of the hard lines under the battery box: