The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

19723DR · 03-13-2010, 06:20 PM

Today I worked on the wiring harness. Since my truck has a clutch, there is no way to move my harness sideways, over and up, unless I want to move the clutch master cylinder - which isn't going to happen--so I did manage to notch the fire wall enough where I was able to recess the entire thing in about 3/4 of an inch which will give me enough room to get the wheel well in there and room to turn.

03-13-2010, 06:20 PM	#64
19723DR Registered User Join Date: Oct 2007 Location: Salt Lake City Posts: 628	Re: Project ''Second Time Around'' Today I worked on the wiring harness. Since my truck has a clutch, there is no way to move my harness sideways, over and up, unless I want to move the clutch master cylinder - which isn't going to happen--so I did manage to notch the fire wall enough where I was able to recess the entire thing in about 3/4 of an inch which will give me enough room to get the wheel well in there and room to turn. __________________ 72 Suburban 3 Door http://67-72chevytrucks.com/vboard/s...d.php?t=265728 family fun cruiser 71 Cheyenne Project http://67-72chevytrucks.com/vboard/s...d.php?t=299232 Almost finished 93 Silverado http://www.67-72chevytrucks.com/vboa...d.php?t=378258 Flamed, bagged, body dropped on 22's 98 Chevy short bed DD 97 Z71 3 Door 51 Suburban-S-10 swap "What other hot rod can you carry 7 of your friends in"