The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - blazer tank install... ON FLEETSIDE steel bed!

70short · 01-07-2004, 03:26 PM

I have A Blazer tank that I will be installing. When I figure out what route I want to take for the filler. I was leaning towards A filler inside the left rear corner of the bed. A small box the size of the channel in depth. Approx 4in tall. Instead of the top being horizontal make it diaginal. Width? what ever I need to pull it together. The bed will have A spray in liner. I seen this on one of our trucks (pic's) it has just been awhile. I would really like to see the pic's again. I know FUEL CELL GUY has A set up similar to this. I will probably contact him when I am ready. See what he would charge and or recommend. My "70" is A fleetside.

01-07-2004, 03:26 PM	#5
70short Registered User Join Date: Sep 2003 Location: Boise ID Posts: 609	Fuel filler I have A Blazer tank that I will be installing. When I figure out what route I want to take for the filler. I was leaning towards A filler inside the left rear corner of the bed. A small box the size of the channel in depth. Approx 4in tall. Instead of the top being horizontal make it diaginal. Width? what ever I need to pull it together. The bed will have A spray in liner. I seen this on one of our trucks (pic's) it has just been awhile. I would really like to see the pic's again. I know FUEL CELL GUY has A set up similar to this. I will probably contact him when I am ready. See what he would charge and or recommend. My "70" is A fleetside. __________________ "72" Red CORVETTE 4-speed 350 "70" Chevy Short Bed early stages of resto. Edel 600 cfm carb Weiand Stealth Intake HEI shorty Headers 4/2 Drop 295 50R 15 TOYO on 10 inch wide corvette rally rims at all 4 corners. "CHEVY RULES"