|
Re: Static lowering a '65 C10 longbed
Quote:
Originally Posted by Clyde65
I dont have direct Jeep spring experience, but this is what I have read and heard from friends. Jeep springs are too light duty, they will lower your truck but they are soft and will bounce a lot and wont carry ANY load
Since the springs are relatively inexpensive, I mean the ones for dropping our trucks, I would suggest to get some of those. You will need shocks and an adjustable pan hard bar if going lower than a few inches.
Bags will give you the best ride, ability to tow also, you can bag all 4 or just the rear. A vendor here on the forum can get you a great deal and tell you specifics for spring rate and such if you need that.
Good luck and Welcome to the forum! Merry Christmas Yall!
|
Quote:
Originally Posted by KJSR
So if I read correctly you are looking to lower it 3-3.5" all the way around?
|
My question is... What, if any, stock springs work in these trucks and what are the results? I know that new springs can be purchased and that air ride can be installed but what is the old school/poor boy method? Thanks...
__________________
Paddle faster, I hear banjo's...
|