Quote:
Originally Posted by OutlawDrifter
Thanks, Russ! I didn't taper the end, trying to keep the heat down on the coil. I figured with my 600+ lbs over an ECSB V6 rig, the 1/4 wasn't going to be enough.
|
haha the taper adds the extra! the original coil is flattened on the end but when you cut off the 1/4 it is at like a 60 degree angle to the pocket, tapering lowers it that little bit and in my opinion helps it fit the pocket.
so potato potatto, same diff!
more than one way to skin an apple.