|
Re: Dead
I decided since the weather is nice I would remove the cap and rotor. I did try to attach the pictures I took but the size is still to big even resizing to the minimum on my phone. Looking at the cap and rotor it looks very clean some metal build up on the terminals. The thing that I don't get is if you take the cap and turn it upside down and then visually center the rotor upside down the contact points are not even close. You can feel that you are on the spring and centered visually, the contact is about an 1/8 of an inch from touching the terminals. I thought that they should be really close? At this point I guess I will install the new cap and rotor when it arrives. I have a bad feeling that it is not going to fix the problem. I should get the inline spark tester a couple of days after I get the cap and rotor. If it does not work with new cap and rotor I will check again for spark out of the distributor.
|