11-18-2023, 07:33 PM
|
#29
|
|
Registered User
Join Date: Oct 2015
Location: Ottawa, Ontario, Canada
Posts: 750
|
Re: Why the **** won’t my rear brakes work??
If I remember right the front of the drum is your parking brake side should be the thinner shoes. As the
Quote:
NOTE
Primary brake shoe (17) has a
shorter lining than the secondary
brake shoe (5), and is always
installed toward front of truck.
|
Parking may have to be adjusted for that side.
are your wheel cylinder shaft the same length as the old one.
__________________
 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed
Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.
|
|
|